One of the six restricted materials is lead. Go to page 54 for instructions on how to replace the battery. Pay close attention to the following when reading the installation instructions for the host chassis, power supply, and other modules: Place the shield inside the chassis as shown in Figure 4. Find the configuration jumper block see Figure Intel may make changes to specifications and product descriptions at any time, without notice.

Uploader: Kagor
Date Added: 26 October 2005
File Size: 9.98 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 59973
Price: Free* [*Free Regsitration Required]

Go to the following links or pages for more information about: You can override the auto-configuration options by specifying manual configuration in the BIOS Setup program.

Updated Graphics Memory Controller Hub GMCH backbone architecture that improves system performance by optimizing the use of available memory bandwidth and reducing the latency of the memory accesses. Installing a DIMM 4.

Remove the Protective Socket Cover A supervisor password and a user password can be set for the BIOS Setup and for booting the computer, with the following restrictions: Add-in cards that support this specification can participate in power management and can be used to wake the computer. Used for end of life products. When using more than one drive the user can have additional protection against data loss in the event of hard drive failure.


Maximum memory performance is achieved with equal amounts of memory installed in each channel.

IntelĀ® Desktop Board DG31PR Product Specifications

Listing of RCP does not constitute a formal pricing offer from Intel. Scroll Back to Top menu. Failure to do so could damage the board and any attached devices.

Graphics Output defines the interfaces available to communicate with display devices. However, there is no guarantee that interference will not occur in a particular acceleratog. To avoid negative shopping experience, we at AVADirect highly recommend to verify product availability information before placing your order.

Intel DG31PR Desktop Motherboard Drivers Download

Setup displays the Maintenance menu. Please note that we do not reserve ordered quantity until payment is fully processed for an order, therefore we cannot guarantee final allocation of ordered quantity if there is a delay in payment processing, due to high risk that the product may become unavailable at that time. Agency certification marks on the product are proof of certification. For correct cable function: Lower the processor straight down without tilting or sliding it in the socket.

Place the jumper on pins as shown below. Properly programmed SPD device data is required for reliable operation.

Downloads for IntelĀ® Desktop Board DG31PR

Connect the main power supply cable to the 2 x 12 pin connector. The board has several hardware management features including the following: Make sure your fingers align to the socket cutouts Figure 10, A.


To avoid overloading the power supply, make sure that the calculated total current loads of all the modules within the computer is less than the output current rating of each of the power supplies output circuits.

See Figure 21, F on page 45 for the location of the multi-colored front panel header.

Replace the computer cover. Table 4 shows the pin assignments for the front panel audio header. Make sure the clips at either end of the DIMM socket s are pushed outward to the open position.

When the computer is plugged in, the standby current from the power supply extends the life of the battery. Push the card ejector lever down using the tip of a pencil or similar tool in the notch Figure 17, B. Attach the cable end with the two closely spaced connectors gray and black to the drives Figure 19, B.

If sold in bulk, price represents individual unit.